Bolefloor – Because Life is Not a Straight Line

No Two Bolefloors are Alike

Bolefloors offer a design solution for most any location: residences, commercial spaces or retail environments.


Bolefloors work in any setting where intimate, natural, and individual interiors are desired.

But there’s no law that a Bolefloor has to be a floor — the technology has been used to create walls and even ceilings.



Bolefloors by Cypress
Hardwood Flooring Ltd.


It wasn’t nature that created straight floorboards. It was the limitations of technology. Bolefloors allow a return to a natural state – floors as nature intended.

Bolefloors are available in solid and engineered Oak Natural, Oak Rustic, Ash Natural and Walnut Natural. Oak Select, Ash Select, and Cherry Natural available by special order.

Making of a Bolefloor

Curv8 – Bolefloor

Curv8 – Bolefloors
Curv8 boards are never cut
from straight planks.

Curv8 board is 11,7mm (0.46″) thick with 3,2mm (0.12”) noble timber wear layer and has bevels, tongue and groove on all four sides.

Engineered Natural grade Oak
Board length: 1810mm/ 71.26”
Board width: about 220mm/ about 8.66”

One Curv8 A module contains 8 boards and covers 2.8m2 (30sf) with an option to purchase 1.4m2 (15sf)
B module to minimize waste. The shipped A module package is 1820mm x 250mm (71.65” x 9.84"), with
a height of 98mm (3.85"). One packaged A module weighs 23kg (50lb).

© 2018 Cypress Hardwood Flooring Ltd.


#123 – 3823 Henning Drive, Burnaby, BC. V5C 6P3

Proudly Serving Abbotsford, Burnaby, Coquitlam, Delta, Maple Ridge, Langley, North Vancouver, Richmond, Surrey, Tri Cities, Vancouver, West Vancouver, Whistler